Thursday, August 15, 2013

THERE'S AN APP FOR THAT




IF YOU WATCH TV YOU'VE HEARD THAT SAID MANY TIMES







It's surprising how often this is true. If you're in the IT or electronics field there are some great apps that will help you with your job or hobby, but the one I'm about to tell you about requires more than the app.

There is a company called OSCIUM that is making waves with it's devices that (sorry Android) work along with your iPhone or iPad. The one I bought was the WiPry-Combo which sells for $199.95, and for that amount of money you really should have use for it. I didn't want to spend the bux,so I waited, and waited, until finally on the ThinkGeek website they had a special sale (about 50% off) so it finally became affordable. We both realize I haven't even told you what this device is, or does - First, the device, which plugs into the charging jack.

WiPry Combo

The WiPry Combo is a Spectrum Analyzer and Dynamic Power Meter combo. The spectrum it analyzes is the 2.4Ghz WiFi band. You can walk into a client's business or residence and determine what sort of noise level and signals may be causing problems with their WiFi network. You can isolate it by channel to find the least affected frequency, then set their router to that channel. I recently tested this at a local veterinarian's clinic and found when certain instruments were used the noise level was almost even with their wireless network signals, which would cause spotty performance.  







 From their website:

Portable, Award-Winning

With Oscium's WiPry-Combo peak power meter and spectrum analyzer, you can pry into the power, spectral, and time characteristics of your signals using an iPhone, iPad, or iPod. WiPry-Combo is the emerging standard in portable RF test equipment for cellular communication planners, RF engineers, wireless network technicians and avid electronics hobbyists. 
Product highlights:
  • Enables iPhone, iPad, iPod to make power and frequency measurements
  • Fits in the palm of your hand
  • Measures rise and fall time, duty cycle and peak power with the precision power meter 
  • Visualizes Wi-Fi, Zigbee, Bluetooth and remote sensor networks using spectral mode
  • Awarded Most Innovative & Best Customer Value
  • Compatible with Lightning and 30 pin connectors (with adapter, works with iPhone 5 & iPad Mini)
 They also have several other products that work with the iPhone and iPad:


MIXED SIGNAL O-SCOPE
 
Product Specs:
  • iMSO-104 Mixed Signal Oscilloscope Hardware
  • 1x/10x Analog Probe
  • Logic Harness (4 Digital + 1 Ground) 
  • SMD Grabbers (5 pieces)
  • Bandwidth 5 MHz
  • Max sample rate 12 MS/s
  • Screwdriver for Analog Compensation Adjustment
  • Analog tip covers (2 pieces)
  • Compatible with Lightning and 30 pin connectors (with adapter, works with iPhone 5 & iPad Mini)

A CHANNEL LOGIC ANALYZER
 
LogiScope transforms an iPhone, iPad or iPod into a 100MHz, 16 channel logic analyzer. Not only is it the most intuitive logic analyzer available, the triggering is so powerful you'll be able to count the hair on your bug (tap product picture on right to watch a short video). Download LogiScope in the App Store and test drive the interface or watch the tutorials below. 
Product Highlights:
  • 100 MHz, 16 channel logic analyzer
  • Two logic harnesses (each with 8 digital, 1 ground)
  • Protocol decoding: I2C, SPI, UART, Parallel
  • Works with 2.0v, 2.5v, 3.3v & 5.0v systems
  • Portable: goes where you go
  • Input voltage -0.5v to +7v
  • Advanced triggering
  • Compatible with Lightning and 30 pin connectors (with adapter, works with iPhone 5 & iPad Mini)
Their website can be found HERE.
 
'Nuff Said,
Woody
 Email