Sunday, July 28, 2013

WHAT RIG AM I USING?









Every now and then I get an email wondering what rig I'm talking on in this picture, some even mistaking it for one of those small form factor Cb's.

What I was using in the photo was my Yaesu FT-817ND HAM portable, which is probably one of my "TOP TEN" HAM rigs of all time (of course I liked them a lot better when you could find them NIB for about $500).

Somewhere in one of my many posts I listed my top ten favorite HAM rigs, so I'm going to list them again, and when I have the time, track down the first list to see what changed (if anything). So, in 2013, here are my top ten Amateur radio rigs, listed in no particular order:
  1. Yaesu FT-817ND
  2. Kenwood TS-2000
  3. Kenwood TS-850AT
  4. Yaesu 450AT
  5. Yaesu FT-530
  6. Yaesu FT-101 series
  7. Yaesu FT-650
  8. Icom IC-751A
  9. Icom IC-207a
I know I did the same thing with Cb's, so here is my 2013 "Top Ten" list -
  1. Stoner Pro40 w/accessories
  2. Uniden Grant (original, 1st series 40ch line)
  3. Uniden PC-122
  4. Cobra 138-XLR (still use one every day in the truck, and keep a back up or two just in case)
  5. SBE Super Console
  6. Midland 13-880/885
  7. Realistic TRC-100B
  8. Realistic TRC-457
  9. SBE Console VI
  10. General Super MC-11


HOUSTON AMATEUR RADIO SUPPLY SELLS AMATEUR RADIOS, CB RADIOS LIKE THE UNIDEN 980



I don't believe I did one with microphones, and I'm not sure I'll hit 10, but I'll give it a go -
  1. Turner Super Sidekick
  2. Turner +3 desk microphone
  3. Turner +3 hand microphone
  4. Turner +2 desk microphone
  5. Icom SM-10
  6. Yaesu MD-200A8X
  7. Astatic 636 Noise cancelling microphone
  8. Astatic D-104 stand w/10DA microphone head
  9. Astatic D-104M6
  10. Astatic 575
That's it for this exciting post. Ah, I almost forgot - it your PC is crippled with viruses and trojans, or just plain slow, call Dave at Houston Amateur Radio supply to arrange and appointment!

'Nuff Said,
Woody

Saturday, July 27, 2013







I'm sure you heard of this, read about them (possibly from here), or this is your first time learning about scams found usually on social media sites like...Facebook.



They are usually posted by a friend who finds the item interesting enough to pass along to their circles of friends, who find it as interesting and pass it along to their friends, much like a chain-letter-email.



WHEN YOU SEE SOMETHING LIKE THIS YOU HAVE TO QUESTION IT


Why should you? It came from a friend? [ed. - and I'll make it clear upfront that I don't know if this is, or isn't, but it caught my attention]

•Usually an ad like this would have the monitor on display, perhaps in front of the box.

•Just by looking at where they took the photo is odd - on the floor, with a crummy background (waste basket or maybe a paper shredder on right edge of photo and what appear to be kitchen doors in the background)

•And the last line "Some of last weeks winners we're Roy Smith & Andy Whitehead".


You would think someone would have done a spell check on this, or maybe they were just in a hurry. I just used the word "were" properly. In the ad above they use "we're", as in we are.

Once again, I don't if this is a real ad, or a phishing expedition (yes, phishing is a word used in the security world), but be careful when giving out info and always doubt the ad.

'Nuff Said,

Woody



Saturday, July 20, 2013

THINGS THAT WILL KILL HAM RADIO






IT COULD TAKE LESS
    IT COULD TAKE MORE...












What do you think could kill Ham Radio? I suppose there's a shortlist like:
  1. The Government
  2. Not enough new Hams to compensate for SK's
  3. A force of nature that makes anything but UHF transmissions possible
  4. A force of man that makes anything electronic possible
  5. Hams themselves
While listed as number 5, it should really be number one - with a bullet. I don't know how many time I've heard a new ham announce himself on repeater, be recognized, and bursting with pride announce he just became a Ham, and then the conversation continues, leaving the new Ham out - more or less leaving him/her on the sidelines (although I must admit certain repeater frequencies are more social than others. That said, I can only think of one in the Houston area)

"Why should I press on and get a higher license" the new Ham asks them self.

A quick view of HF:
  1. There are the medical, daily aches and pains frequencies
  2. There are contest hounds
  3. There are "This is our frequency" groups
Any other ideas you can think of?

'Nuff Said,
Woody
EMAIL









Sunday, July 07, 2013

KEEP THOSE THINGS CHARGED MEN (AND WOMEN...)





















Product Specifications
  • Ultra reliable lithium ion battery with 11200mAh capacity at 5v output voltage
  • Will easily give you over a week of battery boosts for your device (with normal use)
  • 1 amp & 2 amp ports, charge two devices at the same time!
  • 50 hours of movie time for iPhone, iPod touch or 17 hours movie time for iPad 2
  • Compatible with:
    • All iPhones (E.g. Original, 3G, 3GS, 4, 4S & 5)
    • All iPads (E.g. iPad 2, iPad 3, New iPad & Mini)
    • All iPods (E.g. Touch, Nano & Classic)
    • Most Android Devices (E.g. Galaxy 4, HTC One)
    • Most Blackberry & Windows Phone Devices
    • Other Stuff (Kindle, Nintendo DS, Sony PSP, and many more - Standard USB charging cable required)
  • Retractable USB cable included

  • No iPhone/iPad adapter is included because it works with the one you already have
  • Rubberized black finish
  • Batteries: Lithium ion (plug in to recharge)
  • DC transformer input: 100v-240v
  • Weight (main unit): 8.6 oz
  • Dimensions (main unit): 3 3/4 x 3 3/16 x 1
This little power pack supplied (up until last month), 9900mAh DC electricity to charge a variety of items). It's price was $69.99. For the same price, they've upped the amount of stored electricity to 11,200mAh. I own the 9900mAh model, and whether it be Zombies, Tornado's, Hurricanes, or whatever else you can thing of to shutdown power, it always helps to have a variety of "Energy Cells" around the house, or underground safe room to keep your devices charged. You can find it HERE, and, if you buy it before the end of the day you'll get 20% off the regular price!



While I've only owned the 9900mAh model for two months it's been very convenient to charge my dying iPad, iPhone, and Ham Radio HT with this device.

'Nuff Said,
Woody

Thursday, July 04, 2013

WHEN IT COMES TO HAM RADIO...





IT'S A DIFFERENT WORLD NOW




KB5CEJ & KB5CEM

Back when Doug and I became Hams (almost 30 years ago) the whole system was in flux, testing, manufacturing, Hamfests and tailgate sales, along with the disappearance of the local HAM or Electronics store.

At the time we got licensed (Thank you "CW DAVE"/NA5CW) we could go into downtown Houston and if the service calls weren't there we would hang out at Madisons, which besides looking similar to an Episode of "Hoarders", had a whole aisle with used stuff a new or seasoned Ham could use. There was another store just North of downtown that lasted a few years, but Madisons was the big dog in town.

Having passed the written exam, then the 5 wpm (wpm = words per minute) test we were still "Technicians" yet we could use part of 10 meters to actually talk on a transceiver (it wasn't too much longer when they made us "Technician Plus", and those who only passed the written test with "Technician" status). So having a flock of new hamlings wanting to talk on 10 meters, a lot more 10 meter only radios came to the market with Uniden's HR2510 being the most popular.

Uniden HR2510

If you were lucky enough to pass the 13 wpm exam, then you had quite a bit of Amateur Radio designated to use. So IMHO, the mid-80's gave us the most rigs to choose from. We could buy a new one (still a wee-bit pricey), or a used rig, and in that field we could pick a 60's all tube transceiver, or choose from a slew of Hybrid (part tube, part transceiver, part terminator - just checking to see if you're paying attention, 'Nuff Said), or some of the early all transistor transceivers. A newly ordained "General", on a budget, could easily find a used transceiver for under $500.

Almost no one bought a full featured all-mode HF transceiver from his local store because they would have to pay tax. Most Hams have what has been found in DNA research as the "Cheap Ass Cell" so they bought their rigs from out of state stores to avoid tax and get free shipping to their doorstep.

So naturally, Madisons would get a phone call (remember no readily available Internet back then) asking if they had a particular radio in stock, and if so, how much was it, and did they charge for shipping. If all criteria were met, Madisons would ship it out of state to the buyer. Even if they didn't get the sale, it wasn't like it would kill them because the margin of profit on radio sales was so slim you almost didn't notice it.

Accessories, antennas, microphones, etc. had a healthy profit along with having a good technician to do in-house repairs for your customers. At one time, a Ham could successfully repair his own radio, but with almost every rig using surface mount technology, it would take a very steady hand, good lighting, large magnification and a prayer or "Hail Mary" to do it now.

CLICK ON PICTURE TO GET FULL SIZE AND ACTUALLY BE ABLE TO SEE WHAT I'M SAYING

I used to attempt such things but lately it appears as if the components are getting even smaller, discouraging the Ham who was always used to repairing or modifications but now has to take a class just to learn the various menus and what they do.

I attended a couple Hamfests this year and pricing hasn't changed much - and only those with almost throw-away pricing sell rigs. For example, a FT-101 sold new, in 1971 for $499, which was 42 years ago. A used, scratched, but working FT-101 sells in a price range between $300-->$450 today. Was it built with gold plated casings? No. The FT-101 series was a good line that came out with revised versions of the model proceeding it, and if a new ham wants to make that jump from FM to HF, he'd have to check his wallet, the safe in a wall clock, and money in an envelope taped to the bottom of the driver seat, then $450 sounds a lot better to him than $700 and up for a new rig.

The good news for the younger ham, who just got his ticket is that it's much easier to pick up an HT now than it was in the 80's. I remember Doug and I at Madisons looking up at the Kenwood TH-215 2m handheld and seem to recall a price tag of nearly $300 [ed. - keep in mind, this was 2m ONLY]. It was Doug's first HT.

Jumping to the present day, almost 30 years later and single band HT's are in the minority today, replaced by the handheld dualbander HT. If you're not a ham, been asleep under a tree for 30 years, and haven't checked prices if you're reading this blog post I can imagine your thoughts; "If a 2m HT cost almost $300 back then, they'll have to be more expensive now - so what's the use". Don't despair, until recently you could pick up a dual-band HT for about $170, almost half of the price of a single band  HT from the 80's.

I did say "until recently", because there has been a shake up in pricing as of late, along with the well established manufacturers like Yaesu, Kenwood, and Icom facing HT competition from Chinese manufacturers. So what can you expect in pricing?

Yaesu's FT-60r has been around a long time and you'll find it under $150. Baofeng, one of the new Chinese manufacturers has the UV-5RA and UV-5R+, both dual-band handhelds selling for under $50 each via places online like Amazon.

I've owned and used the 5R+ for a little over six months now and it still works great. I paid about $45 for the HT and $10 for the programing software and cable [ed. - Hint, buy the s/w and cable and save yourself the grief]. I wanted to know what would happen if I went even cheaper and bought the 5RA for about $35 recently, and all I can say (having it for such a short time) is: "So far, so good".

Looking at it another way, if you spend $40 for the Baofeng HT, you've spent the price the "Big 3" charge for just the programming software and cable.

THE BAOFENG UV-5R+



BAOFENG UV-5RA, CURRENTLY $35.89 ON AMAZON

I'll be interested and looking forward to their first venture into the world of HF, because if they maintain the quality that these HT's have (at least the ones I own), it could really change the landscape as far as who is the most dependable HF transceiver maker, with the lowest price.

For now, I'm happy with what I have and hope the Government doesn't take away Amateur Radio band space, just for the money, allowing for more cellphone frequencies.

If you are a Ham now, you should be watching this carefully, and I'd recommend joining ARRL to keep informed and add to the ranks of those who are fighting to keep our frequencies.

'Nuff Said,
Woody

Email to: Woody